Keypad, Left
|
|
|
Left had key pad.
|
NOTE: Removal of backing paper voids warranty. DO NOT peel the backing from the new overlay and/or keypad without electrically testing first. Connect the ribbon cable of the new overlay and/or keypad to the display electronics and test the part prior to removing the paper backing and complete installation. If you have the same problem as with the original part, please continue troubleshooting the unit to ensure the problem is the overlay / keypad.
|
|
Used on the following models:
|
|
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM
Qty | AB2 | Stabilizer Set;SL;;;;Right | | AC1 | CONSOLE MAST SET, EP76-KM, SBOM | | AE3 | Call For Info | | AF1 | Guide Raid Welding SET(Painting), EP76-US | | AF3 | MOTOR FIX CON BASE(Welding)(Painting), | | AG1 | HANDLEBAR SET, RIGHT, EP76-KM, SBOM | | AG2 | HANDLEBAR SET, LEFT, EP76-KM, SBOM | | AG3 | MIDDLE HANDLEBAR SET;With HPG;MX-E5 | | AJ1 | Crank Set, MX-E5XC-F, US, EP81 | | AL1 | R Stabilizer Welding(Painting), EP76-US, | | AN1 | Display Console | | AT1 | Call For Info | | B20 | Transport Wheel;;;Nylon;?100;BL;;EP23 | | B21 | Tube, #25.4x2.0tx230.0L, EP76-B21A, | | B35 | R FRAME CON PLATE, SPHC 6.0t, EP76-B35A, | | B38 | Foot, Leveler | | B39 | SuptRod Cover, ABS, EP76-B39A, | | B60 | Screw | | B61 | Nut, Hex, Flange | | B62 | Washer;LK;M16.2X31.5X1.5 | | C54 | Screw | | C55 | Retainer | | C57 | Screw;Flat Hex Socket;M8x1.25Px25L | | C58 | Insert Nut;M8x1.25P w/ZC PL | | C59 | Screw, Hex Socket | | C60 | Washer, Locking | | D51 | Screw | | D60 | NLA Grip, HR | | D62 | Plate, Contact, HR | | D64 | Keypad, Left | | E05 | Wheel, Roller | | E13 | RING MAIN AXLE | | E23 | Bearing, Needle | | E49 | Bushing;A;CU;EP23B SS41 | | E50 | Teflon Washer, Flat M10.2x38.0Px1.0T;SS41 | | E52 | Bearing, Sealed | | E53 | Screw; | | E54 | Nut, Nylon | | E55 | Washer, Flat | | E56 | Bearing, Sealed | | E57 | Washer, Flat | | E58 | Screw | | E60 | Washer | | E61 | Clamp, Inner | | E62 | C-Clip | | F01 | Rail, Hard Membrane, AL 6063, EP76 | | F05 | Rail, Up, Anodizing, AL 6063, EP76 | | F07 | Guide Rail Swivel Axle, S45C, EP76-F07B-1, | | F19 | SCREW, M12X1.25PX19.5L, HE, CRMO, RAIL | | F22 | WHEEL, POM, EP76-F22A, | | F23 | Guide Rail RUBBER , NBR(BL), EP76-F23A, | | F25 | Alex Fix Ring, SS41(BED), EP76-F25E, | | F28 | Call For Info | | F52 | Screw | | F53 | Screw | | F56 | ROUND HEX SOCKET SCREW M10X1.5PX30L | | F60 | Retainer | | F61 | C-Clip | | F62 | Washer, Flat | | F64 | Bearing, Sealed | | G10 | Call For Info | | G11 | Painting;Swivel Base Sleeve Cap;SL/GY;;; | | G50 | Retainer | | G51 | Vertical Handlebar Upper End Cap | | G52 | Arm Rest | | G53 | Bearing, Sealed | | H38 | Screw | | H50 | Nut | | H51 | Bearing, Rod End | | J05 | Screw;Phillip;BH;M5x0.8Px10L;;;Zn-BL | | J07 | NLA Spring, Compression | | J50 | Retainer | | JM01 | Generator | | JM16 | Elevator Motor, DC, 600LB/1/9HP DC12V, JM16 | | L04 | Call For Info | | L51 | Screw | | L53 | Screw | | L54 | Spring Washer | | N01 | Housing, Console, Lower | | N06 | Console Lower Cover(PAINT) WH/GD+PU | | N07 | NLA Overlay, Console | | N24 | Control Board, Quick Key | | N25 | Screw;Round Cross Tapped;M3X30L | | N26 | Nut | | N30 | Cup Holder, Console | | N51 | Screw;Phillip;BH;Stainess;M5x0.8Px8L; | | N71 | Overlay(Middle);EP72-US(ENG) | | N72 | Overlay, Lower | | P01 | Console Wire, 1400L, (RJ45)x2, EP76, | | P04 | PWR Socket Wire, 1700L, (SCD-026A), EP70, | | P06 | TV Signal Wire, 1700L, (FM-0086-NBG7)x2, EP | | P08 | Controller, Motor | | P09 | Controller, Motor | | P10 | Pulse Senson Wire;820L;(TKP H66031P-06); | | P11 | Grip Pulse Extension Wire;1300mm | | P61 | Screw | | P63 | Screw | | Q03 | Console Mast Cover;PVC(BL);EP76-Q03A; | | Q04 | Pedal, ABS, PA-746 Black, EP76 | | Q06 | Guide Rail F cover, ABS PA-746(BL), | | Q08 | Guide Rail middle cover, ABS PA-746(BL), | | Q09 | Cover;Pulley;PP;;BL;EP68-Q09C | | Q10 | E-PORT Fix Plate;ABS PA-746(BL) | | Q11 | Cover, Link arm, Right | | Q12 | Cover, Link arm | | Q14 | Cover, Right | | Q15 | Painting, Anti-Sweat Cover, EP76-US | | Q16 | Handlebar Cover;;ABS PA-746;;BL;;EP68 | | Q18 | NLA Endcap, Round | | Q20 | Boot, Crank | | Q21 | Boot;Swivel Axle;;ABS PA-746;;BL;;EP68 | | Q26 | Link Arm Pillar | | Q28 | Link Arm End Cap;NY(BL);EP76-Q28B; | | Q29 | End-Cap, Seat Pad | | Q51 | Washer;Flat;?5.5x?10.0x1.2t;;Zn-BL | | Q52 | Screw | | Q53 | Screw | | Q54 | Call For Info | | R01 | Call For Info | | R04 | PULLEY AXLE SET, EP76-KM, SBOM, OLD | | R05 | Call For Info | | R08 | Bearing, Sealed | | R09 | Belt, Drive | | R16 | KEY, 2-END ROUND 6X6X20L | | R17 | Retainer | | R40 | KEY, 2-END ROUND 6X6X12L | | R41 | Call For Info | | R42 | Call For Info | | R43 | NUT, HEX;S45C; EP23-R43 | | R44 | RING; CTR TUBE, SS41;EP23 | | R46 | Center Axle Sleeve(B);EP72-US;AR7 | | R48 | Nut | | R50 | WASHER, FLAT M30.3x45.0Px1.2T | | S02 | Bolt;Eye Hook;1/4-20UNCx105L;;Zn-BL | | S03 | ECB Anti-Sweat Plate;1.0t;EP76-S03D; | | S50 | Washer, Lock | | S51 | Screw | | S53 | Washer, Flat | | S55 | Screw | | S56 | Nut, Locking | | S60 | Screw | | T05 | Idler Axle;SS41;M20x32.4L | | T49 | Bearing, Crank | | T50 | Washer;Flat,Zn Plate BL M20.2X30.5PX2.0T | | T51 | Screw | | V04 | Decal;Side Cover;EP68-US;EP68 | | V05 | Sticker, Aperture, TV Rack | | W25 | Switch, Membrane, Left | | W26 | Switch, Membrane, Right | | W27 | Membrane Keypad;Down;Plane 6Key;EP72 | | W30 | Program Board | | Z01 | Screw | | Z02 | Washer, Wave | | Z04 | SCREW, SH, M8X1.25PX65L, HS, BAN, | | Z05 | Screw, Hex Socket | | Z06 | Washer, Flat | | Z07 | Nut, Locking | | Z08 | Washer, Spring | | Z12 | Washer, Flat | | Z13 | WASHER, FLT, #10.3X#35.0X2.0T, | | Z30 | Sleeve, Rod end | | 1 | Incline motor | | 2 | Incline motor worm shaft nut | | 3 | Motor Wire, 1700L, (MOLES 050-84-1060), EP7 | | 4 | Hybrid ECB | | 5 | Controller, Motor | | 6 | Dual Action Handlebar LH | | 7 | Dual Action Handlebar RH | | 8 | Dual Action Handlebar Pivot Assembly | | 9 | Console mast | | 10 | Matrix logo badge | | 11 | Fixed Handlebar assembly | | 12 | Hardware kit 1 | | 13 | Hardware kit 2 | | 14 | Foot, Leveler | | 15 | Display Console | | 16 | Cup Holder, Console | | 17 | Housing, Console, Lower | | 18 | Upper control board | | 19 | Lower control board | | 20 | NLA Display Board;*Type;CB64; | | 21 | HEART RATE BOARD RECEIVER BOARD, SALUTRON | | 25 | Keypad set | | 26 | Overlay set | | 30 | Console Lower Cover(PAINT) WH/GD+PU | | 31 | Ramp Assembly | | 32 | Wheel track set | | 33 | Ramp Lift Linkage Assembly | | 34 | Wheel, Ramp | | 35 | Worm shaft pillow block | | 36 | Rear ramp cover | | 37 | Upper wheel track cover | | 38 | Ramp front cover | | 39 | Guide Rail middle cover, ABS PA-746(BL), | | 40 | Guide Rail Side Rail;UPVC(BL);EP76-Q07A; | | 41 | Ramp pivot shaft | | 42 | LOWER LINK ARM, LEFT, EP76-KM, SBOM | | 43 | LOWER LINK ARM, RIGHT, EP76-KM, SBOM | | 44 | PEDAL ARM SET, LEFT, EP76-KM, SBOM | | 45 | PEDAL ARM SET, RIGHT, EP76-KM, SBOM | | 46 | Pedal Arm pivot assembly | | 47 | Wheel, Roller | | 49 | Idle Pulley Set;EP68-US | | 50 | NLA Crank arm assembly | | 53 | Plastic covers | | 54 | Left Cover Set;MX-E5xcs;EP72 | | 55 | Cover Set;MX-E5xcs;EP72 | | 56 | NLA Disc, Cover | | 58 | Handlebar Cover;;ABS PA-746;;BL;;EP68 | | 59 | Plastic covers | | 60 | Pedal arm - front | | 61 | Link Arm - front | | 62 | Dual action handlebar pivot cap | | 63 | Footpedal | | 64 | Pedal Pad;Rubber(BL);EP76-Q05A; | | 65 | Link arm caps | | 66 | Link arm roller wheel cap | | 67 | Front stabilizer | | 68 | Rear stabilizer | | 69 | Transport wheel | | | Foot, Leveler | | | Foot, Leveler | | | Switch Set;Power;470(KST FDFNYD1-250-1)x | | | Insert Nut;Hex; M5X0.8P | | | SCREW, SH, M5X0.8PX16L, HS, BZN, | | | Screw;Hex Socket;Round;M8x1.25Px10L;;Zn- | | | C-Clip | | | Retainer | | | Retainer | | | Bushing, Pedal Arm, A, CS05 | | | Guide Raid Supt Plate, S20C, EP76-F08A, | | | Guide Raid Swivel Axle, S45C, EP76-F11A, | | | WHEEL, POM, EP76-F22A, | | | Screw Mast U Cover, SPHC 3.0t, EP76-F26E, | | | Screw Mast D Cover, S45C(BED), EP76-F27F, | | | Guide Rail Side Rail;UPVC(BL);EP76-Q07A; | | | Holder, Bottle | | | Screw, Hex Socket | | | Nut | | |
|
