Overlay, Console
This part is NO LONGER AVAILABLE. You cannot purchase this part.
|
|
|
Display console lower overlay.
NOTE: Removal of backing paper voids warranty. DO NOT peel the backing from the new overlay and/or keypad without electrically testing first. Connect the ribbon cable of the new overlay and/or keypad to the display electronics and test the part prior to removing the paper backing and complete installation. If you have the same problem as with the original part, please continue troubleshooting the unit to ensure the problem is the overlay / keypad. |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM
Qty | AC1 | CONSOLE MAST SET, CB65, SBOM | | AD1 | Post, Seat | | AD3 | Pin, Adjustment | | AG1 | Handlebar | | AJ1 | Painting, Stabilizer Set, SL/GY, F, CB61 | | AJ2 | Base Frame Set;Painting;FW40 | | AK1 | Sensor, HR, Left | | AK2 | Sensor, HR, Right | | AN1 | Console, Display | | AT1 | Axle, Pedal | | AU1 | TENSION WHEEL SET, CB65, SBOM | | B41 | Fix Plate, Cover, SPHC, 2.0t , CB62 | | B42 | Plate, Port Fix | | B52 | RVN, HX, NKHS-580-2.5(M5X0.8P), YZN, | | B53 | BOLT BH M6X15 | | B55 | Screw, Tapping, Oval | | B56 | Screw, Oval Head | | C08 | Holder, Bottle | | C11 | GUIDE RAIL RUBBER WASHER;Rubber;EP68-C11 | | C12 | Painting, Console Fix Plate, Silver Gray, | | C21 | Insert Nut;M8x1.25P w/ZC PL | | C22 | Screw;Flat Hex Socket;M8x1.25Px25L | | D06 | Pad, Seat | | D11 | Screw, Phillip, BH, M6x1.0Px50L(Tooth10L), | | D12 | Nut, nylon | | D60 | HAND PULSE GRIP;FAST KEY;L;KM;RB73 | | D61 | Grip, Sensor, D, ABS, BL, RB73 | | D62 | Plate, Contact, HR | | D64 | Keypad, Left | | D65 | NLA Keypad, Overlay , Right | | G21 | Seal, HR | | J21 | NLA Leveler, Front Stabilizer | | J22 | Leverler, Rear Stabilizer | | KIT | Hardware, Kit | | L01 | Wheel | | L02 | Screw | | L03 | NYLON NUT | | L04 | Washer, Flat | | N01 | Housing, Console, Lower | | N02 | Housing, Console, Lower | | N04 | Reading Rack | | N05 | Cap;C-SAFE;BL;CB32 | | N06 | Console Lower Cover(PAINT) WH/GD+PU | | N07 | NLA Overlay, Console | | N09 | Overlay, Console, Middle | | N13 | NLA Overlay, Console | | N14 | CONSOLE CONTROL BOARD, MX 5 Series, CB61-D | | N18 | Signal Wire;4;50L;(XAP-05V-1)x2;CB61; | | N19 | Cup Holder, Console | | N24 | Console Lower Cover(PAINT) WH/GD+PU | | N25 | Screw | | N26 | Nut | | N27 | LED Apertures Board;MATRIX U5/R5/E5;CB32 | | N51 | Screw, Oval Head | | P01 | Console Wire, 1580L, (XAP-07V-1+TKP H6630R | | P02 | ECB Wire, 150(3.96-5P+HL20P-03) | | P03 | Pulse Sensor Wire, 900L, ALEX 3020-08N, CB6 | | P04 | PWR Socket Wire, 1450L, (SCD-026A+ALEX 302 | | P05 | POWER RESISTANCE, WITH WIRE, 400W 10#, VH3. | | P06 | Exchange connector, TV, F HDR Into F HSG 9 | | P07 | CONTROLLER SET JE07002;CE NON RoHS | | P11 | H/P EXT GND Wire, 1100L, (#5.0 OT), CB62, | | P12 | Ferrite; | | P13 | Cord;FH0900W;EP68-P11A | | P14 | Ferrite; | | P17 | TV Coax Adaptor-Female;CB61 | | P21 | TV Power Wire 800 (5CFx2 EP68-P21B-2940 U5X | | P53 | SCREW, BH, M5X0.8PX12L, PH, BZN, BO8M05001 | | P54 | Nut;M5;Plating CR | | P55 | TV Coax Adaptor-Female;CB61 | | P59 | Screw, Oval Head | | Q01 | Cover Set, U3x S/N before CB86110701776 | | Q02 | Cover Set, U3x S/N before CB86110701776 | | Q03 | Boot, Console Mast, PVC, BL, CB62 | | Q04 | Boot, Seat Tube, PVC, BL, CB62 | | Q05 | Sleeve, Seat | | Q06 | Cover, Crank, PVC, BL, RB70 | | Q16 | Handlebar Cover;;ABS PA-746;;BL;;EP68 | | Q20 | PLATE CONNECTING COVER FRONT | | Q21 | PLATE CONNECTING COVER FRONT | | Q22 | Screw | | Q23 | Washer | | R01 | RIGHT LOWER-LINK-ARM SET | | R02 | PULLEY, POLY-V, NYLON 6+30%FIBER, J6#235, | | R03 | PULLEY, POLY-V, ONE-WAY BEARING( | | R05 | Fix Pass axle Cover A, #66x48.5L SS41(Pai | | R06 | Ring, #26x10L , CB61 | | R07 | Sleeve, CTR Tube, B, SS41, #55x2.1L, CB61, | | R08 | Belt, Drive | | R09 | Belt, Drive, 8 ribbed | | R10 | Ring, #26x10L , CB61 | | R19 | Bearing, Sealed | | R20 | Bearing, Needle, Clutching | | R22 | KEY, 2-END ROUND 6X6X12L | | R25 | Washer, Flat | | R26 | Screw | | R27 | NUT, HX, M50X1.0P, SS41, ZN, | | R28 | WASHER, FLT, #25.3X#40.0X1.0T, TFN, | | R29 | Retainer | | R30 | Washer;Flat;?20.2x?35.0x1.0t;;Zn-BL | | S01 | Brake, Resistance | | S02 | SCREW, EB, 1/4-20UNCX55L(25L)Eye#10, ZN-BL | | S03 | Washer | | S04 | Nut | | S05 | Plate | | S06 | Nut, Locking | | S07 | Washer | | S08 | Nut | | S10 | Screw | | S11 | Washer | | T01 | Axle, Pedal | | T03 | RIGHT CRANK BEARING FIXING BASE, SS41(ZN) | | T04 | Nut, Bearing, Left | | T05 | Nut, Crank, Left | | T06 | Washer, Tabbed | | T08 | Pedal, Set | | T09 | Strap, Pedal | | T11 | Bearing, Sealed | | T14 | Nut, Crank , R, SS41, #32, CB32 | | T15 | Ring, Pedal Assembly, F, SS41, #31.8, CB32 | | T16 | Ring, Pedal Assembly, Rear, SS41, #31.8, C | | T17 | LARGE SCREW, OVAL HEAD M4X0.7PX8L | | T18 | Nut, Rim, SS41, #32, CB32 | | U06 | Bushing, Sleeve | | U07 | Bearing, Crank | | U08 | Clamp, External C-Shaped, S-19, | | U10 | NUT, HX, M8/MP6803-08, SS41, ZN, | | U11 | Spring | | U12 | Screw | | U13 | Washer, Flat | | U14 | WASHER FT 20.3x30x1.0 TEFLON | | V02 | Decal;Side Cover;EP68-US;EP68 | | V04 | Decal, Serial # | | V13 | Sticker, Aperture, TV Rack | | V21 | RIVET, 1/8x12.5 | | W25 | Switch, Membrane, Left | | W26 | Switch, Membrane, Right | | W27 | Screw;BH;M3x12L;SM;PH;CST;BAN;F-T | | W31 | Control Board, Quick Key | | W32 | Console Wire;200L;KP H6630P1-08;EP71; | | W35 | Pulse Sensor Wire;300L;(SMR-02V-BC);CB64 | | W37 | HR Board Power Wire;220L;(TKP 2510A-3P | | W38 | Ferrite Choke;FH0900B-2;Lian Ci;TM38 | | X11 | Screw | | Y25 | Quickly Key Wire;200L;(TKP H6630P-06+TKP | | Z11 | Screw, Hex Socket | | Z12 | Spring Washer | | Z13 | Screw | | Z21 | Bolt | | Z22 | Washer | | Z23 | Spring Washer | | Z31 | Screw | | Z32 | Spring Washer | | Z33 | Washer | | Z34 | Screw, Hex Socket | | Z41 | Screw | | Z42 | Washer, Flat | | Z43 | Washer, Spring | | Z51 | SCREW, SH, M5X0.8PX12L, HS, BAN, | | Z52 | WASHER, SPL, #5.2X#10.0X1.0T, BAN, | | | HR Board Receiver | | |
|
