Overlay, Keypad
|
|
|
Key pad overlay.
NOTE: Removal of backing paper voids warranty. DO NOT peel the backing from the new overlay and/or keypad without electrically testing first. Connect the ribbon cable of the new overlay and/or keypad to the display electronics and test the part prior to removing the paper backing and complete installation. If you have the same problem as with the original part, please continue troubleshooting the unit to ensure the problem is the overlay / keypad. |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM
Qty | AC1 | CB32 CONSOLE MAST WELDING SET(PAINT) | | AC2 | TV BRACKET SET W/CABLES | | AD1 | Seat Post Tube Set PICTURE CB32(HALFTONE PRINTING) | | AG1 | HANDLEBAR SET(W/HAND PULSE) | | AN1 | NLA Display, Console | | AN2 | Grip, HR | | AU1 | TENSION WHEEL SET, CB32, SBOM | | B23 | Clip, Retainer | | B24 | OVAL CRISSCROSS SCREW M5X0.8PX12L(BED) | | B25 | Nut | | B28 | Clip, C-Shaped, USN-4043, | | B51 | RVN, ALS7-470-3.3(2.0-3.3), YZN, | | C04 | Extrawork, Console tube, Anodizing, CB32- | | C06 | Cover, Console, LD, ABS, GY, CB32 | | C07 | Cover, Console Mast, Upper, Right | | C08 | Cover, Console Mast, Upper, Center | | C11 | TV Rack Sleeve | | C12 | SCREW, SH, M8X1.25PX50L-30L, HS, BP, P-T | | C13 | Washer, Flat | | C14 | NYLON NUT | | C15 | SCREW, ROUND-TAPPING PHILLIP M4X12L | | C16 | SCREW, BH, M4X0.7PX38L, PH, BAN, | | C17 | FLAT WASHER | | C18 | NUT, NLK, M4X0.7P, BZN, | | C19 | Screw | | C21 | GROMMET RAIL HARNESS | | C22 | Washer, Locking | | D03 | Sleeve, Seat Tube, Nylon, BL, CB32 | | D04 | NLA Sleeve, Seat | | D05 | Pin, Adjustment | | D06 | Pad, Seat | | D07 | Screw | | D08 | Washer, Spring | | D09 | SCREW, FH, M4X0.7PX10L, PH, BAN, | | D10 | BUSHING, ECB, POM, JS001 | | D11 | Screw, Phillip, BH, M6x1.0Px50L(Tooth10L), | | D12 | Nut, nylon | | D15 | NUT, NLK, M4X0.7P, BZN, | | D16 | Washer, Flat | | G08 | Screw | | J01 | Painting, Stabilizer, CH, R, CB32 | | J02 | Painting, Stabilizer, CH, RF, CB32 | | J03 | Painting, Stabilizer, CH, LF, CB32 | | J04 | Foot, Leveler | | J05 | Bolt, Socket | | J06 | SCREW, TH, M8X1.25PX50L-15L, HS, P-T | | L01 | Wheel | | L02 | Screw | | L03 | Washer, Flat | | L04 | NYLON NUT | | N/A | PWR Socket Wire, 1450L, (SCD-026A+ALEX 302 | | N10 | Cup Holder, Console | | N15 | Overlay, Keypad | | N21 | Grip, Sensor, CB32 | | N22 | Plate, Contact, HR | | N23 | NLA Endcap, Round, Internal | | N25 | Screw, Self-tapping | | N26 | Screw | | N27 | Nut | | N28 | Cap;C-SAFE;BL;CB32 | | N29 | CON Wire;Pulse Receive Board;250(H6657P- | | N36 | Hole Plug | | P04 | CON Wire, Electron CTL Set, 400(3.96-5P In | | P05 | Power Electric Resistance, Contain Wire, 4 | | P06 | Sensor Wire;Pulse Grip;L;700 (H6657R1-2+ 700 (H6657R1-2+110XF) | | P10 | Mount, Wire tie | | P11 | TV Coax Adaptor-Female;CB61 | | P16 | Ferrite Choke;FH0900B-2;Lian Ci;TM38 | | P18 | Earphone Extended Line;185(3.5 Three-D E 185(3.5 3-D EARPHONES+MICROPHONE F*BASE) | | P19 | PWR Exchange Wire, 1200(XAP-02V-1+H6657R1 | | P20 | E-PORT Circuit Board Set | | P21 | TV Signal Wire, 1250(FM-0086-NBG7)x2 | | P25 | PWR Wire, TV, 1250(SMR-02V-B)X1, CB32 | | P37 | END CAP | | P38 | Hand Pulse Cable, 700 (H6657R1-2+110 F Socket) | | Q01 | SIDE COVER SET-RH | | Q02 | SIDE COVER SET-LH | | Q03 | Boot, Console Mast, PVC, BL, CB32 | | Q04 | Boot, Seat Tube, PVC, BL, CB32 | | Q05 | Cover, Crank, PVC, BL, RB70 | | Q06 | Plate, Port Fix | | Q07 | OVAL PHILLIP SCREW M4X0.7PX15L | | Q08 | Screw;Phillip;BH;M3x0.5Px14L;;Zn-BL | | Q09 | Cover, Plate, Side | | Q10 | FLAT WASHER ?5.0X?10.0X1.0T | | Q14 | Screw, Tapping, Oval | | R01 | DRIVE ALXE SET | | R02 | PULLEY, POLY-V, ZINC PLATING, SS41, J10#65, | | R03 | PULLEY, POLY-V, NYLON+30%FIBER, J6#254, C | | R04 | FIXING BEARING HOUSING SET | | R05 | SLIDING BEARING HOUSING SET | | R06 | Nut | | R07 | Key, Round, Dual-End, 6x6x15L, | | R08 | Ball Bearing | | R09 | Bearing, Crank | | R10 | Bearing, Needle | | R11 | C-Clip | | R12 | C Clip-Internal | | R13 | Retainer | | R14 | Retainer | | R15 | Screw | | R16 | Washer, Flat | | R18 | Washer, Flat | | R19 | Belt, Drive | | R20 | Belt, Drive | | S01 | Brake, Resistance | | S02 | EYE HOOK SCREW EYE HOLE 10 | | S03 | Washer | | S04 | Nut | | S05 | Plate | | S06 | Nut, Locking | | S07 | Washer | | S08 | CONTROLLER SET JE07002;CE NON RoHS | | S09 | Nut | | S10 | Screw | | S11 | Washer | | T01 | Axle, Pedal | | T02 | Pulley | | T03 | RIGHT CRANK BEARING FIXING BASE, SS41(ZN) | | T04 | Nut, Bearing, Left | | T05 | Nut, Crank, Left | | T06 | Washer, Tabbed | | T07 | Bearing, Sealed | | T08 | Pedal | | T09 | Strap, Pedal, Set | | T13 | Nut, Crank , R, SS41, #32, CB32 | | T15 | Ring, Pedal Assembly, F, SS41, #31.8, CB32 | | T16 | Ring, Pedal Assembly, Rear, SS41, #31.8, C | | T18 | Nut, Rim, SS41, #32, CB32 | | T19 | LARGE SCREW, OVAL HEAD M4X0.7PX8L | | U04 | Bracket, Spring | | U05 | Bearing, Sealed | | U06 | Retainer | | U07 | Bearing, Crank | | U08 | Clamp, External C-Shaped, S-19, | | U09 | Screw, Hex, M8x1.25Px25L, | | U10 | NUT, HX, M8/MP6803-08, SS41, ZN, | | U11 | SPRING | | U12 | Screw, Hex, Round | | V04 | Matrix Logo Decal | | V05 | Decal, Serial # | | V06 | RIVET, 1/8x12.5 | | V15 | Label, Console, PU, CB32 | | | Manual, Assembly | | | Manual;Manipulate, English | | | Semi-Assembly, CB32 Hardware, With Tool (, CB32 | | |
|
